4X4 SNORKEL suitable for the Toyota 200 Series Landcruiser 03/2012-10/2015 4.6L Petrol 1UR-FE
Safari Part Number: SS87HF
Safari Part Number: SS87HF
The SS87HF Safari Snorkel suitable for Toyota 200 Series Landcruiser 4x4 is designed to deliver a huge volume of the coolest and cleanest air possible into the stock air cleaner assembly of 03/2012-10/2015 4.6L Petrol 1UR-FE engines.
With the huge air flow demands of each engine in the Toyota 03/2012-10/2015 4.6L Petrol 1UR-FE 200 Series Landcruiser, Safari took the decision to design a snorkel system that raised the air intake to prevent ingesting harmful elements to the vehicles air cleaner.
Huge air flow is but one aspect of the ultimate in designing a snorkel suitable for the Toyota 200 Series Landcruiser. The Safari snorkel air ram is designed to perform two very important roles. The most obvious is to funnel cool clean air into the snorkel body - but just as importantly, the Safari air ram acts as a highly efficient water separator to remove rain water from the incoming air stream - thus ensuring safe engine operation through even the most torrential tropical storms.
The genuine Safari Snorkel suitable for Toyota 200 Series Landcruiser 4x4 body and air ram is manufactured to the highest standards in durable, UV stable, cross linked polyethylene material. In addition, the substantial material wall thickness delivers huge physical strength to ensure that the Safari Snorkel suitable for Toyota 200 Series Landcruiser breezes through the toughest off-road conditions on the planet.
Part Number SS87HF
Actual model not shown.
ITEM | PART NO. | DESCRIPTION | QTY |
---|---|---|---|
1 | 370-133-000 | BODY - SNORKEL (SS87HF) | 1 |
2 | 000-135-800 | AIR RAM ASSEMBLY | 1 |
3 | 370-032-000 | BRACKET - UPPER MOUNTING | 1 |
4 | 000-002-100 | BOLT - HEX - 6mm x 1.0 x 14mm (SEMS) | 2 |
5 | 000-951 | SCREW - S/T - 4.2mm x 13mm | 3 |
6 | 000-960 | INSERT - PLASTIC | 3 |
7 | 370-435-000 | GASKET - UPPER MOUNTING BRACKET | 1 |
8 | 000-110 | STUD - S/S - 8mm x 1.25 x 25mm | 5 |
9 | 000-349-300 | WASHER - BODY - 8.4mm x 40mm - 304 S/S | 5 |
10 | 000-377 | WASHER - RUBBER - 8.5 x 42 x 3mm | 5 |
11 | 000-205-300 | NUT - NYLOC - S/S - 8mm x 1.25mm | 5 |
12 | 370-967-000 | BRACKET - GUARD SUPPORT | 1 |
13 | 370-025-000 | SLEEVE - LOWER INSERT (Rubber) | 1 |
14 | 370-024-000 | HOSE - AIR ENTRY | 1 |
15 | 000-910 | CLAMP - HOSE - 90/110mm | 2 |
16 | 000-914/B | CLAMP - HOSE - No. 56 (BLACK) | 1 |
17 | 370-016-000 | GASKET - FOAM BODY (Self Adhesive) | 1 |
18 | 370-017-000 | TEMPLATE | 1 |